ZE375GK‑1181 | 2023 | 611 h | Changsha — Standard Digging Bucket

Basic information

• Brand / Model: Zoomlion ZE375GK (unit 1181)
• Manufacture year: 2023
• Operating hours: 611 h
• Attachment: Standard digging bucket (please confirm capacity, width and tooth type)
• Location: Changsha, Hunan, China

Condition summary

• Hours: 611 h — low-to-moderate use; generally near‑new with limited wear but verify recent usage and maintenance.
• Engine: Expected to be in good condition; check cold start, idle stability, smoke, oil consumption and DPF/SCR status if fitted.
• Hydraulics: Likely good, but inspect pump, valves, hoses and cylinder seals for leaks or seepage under load.
• Undercarriage & driveline: Check shoes, rollers, idlers, sprockets and track tension — wear may be minimal but should be confirmed.
• Structure & attachments: Inspect boom/arm pin bores for play, any weld repairs, and bucket cutting edge/teeth wear.
• Electrical & cab: Test gauges, joysticks, HVAC, lights and any installed cameras/alarms.
• Documents/warranty: May still be under factory warranty depending on registration—confirm with serial/VIN and paperwork.

Recommended pre-purchase inspection checklist

• Documents: serial/VIN plate, factory certificate, service records, warranty papers.
• Engine: cold start, idle and warm-up; oil & coolant levels/condition; check for smoke or leaks; review aftertreatment history.
• Hydraulics: pressure/flow test, hydraulic oil condition, inspect hoses, pumps, valve block and cylinder rods.
• Undercarriage: measure shoe thickness, sprocket tooth profile, rollers/idlers and pin/bushing wear.
• Boom/arm/pins: check axial/play at pins, visual cracks, welds and cylinder rod condition.
• Bucket: cutting edge thickness, teeth condition and quick-coupler function (if fitted).
• Final drives & travel motors: inspect for leaks and abnormal noise/temperature during operation.
• Electrical/controls: scan for fault codes, test joysticks, switches, lights and HVAC.
• Test run/video: cold start, idle, empty & loaded digging cycles, travel and swing under load; note any abnormal noises, smoke or overheating.

Suggested listing media & info

• Photos of serial/VIN plate and factory certificate
• Recent service/maintenance invoices and any parts replaced
• Engine model and rated power, hydraulic specs (if available)
• Bucket spec (capacity/width/teeth type)
• High-resolution photos: full machine (multiple angles), cab interior, engine bay, undercarriage close-ups, boom/arm pin areas, bucket details
• Short working video: cold start and operational digging/travel cycles

Next steps

• Provide the machine serial/VIN, any service/warranty records and recent photos/videos and I can:
  • verify warranty status,
  • help assess condition and estimate market value,
  • draft a sale listing in Chinese/English,
  • or prepare a detailed pre‑purchase inspection checklist for an on-site inspector. Which would you like?