ZE375GK -1025| Mar 2023 | 3,119 h | Parked in Changsha — Standard Digging Bucket

Basic information:

• Brand: Zoomlion
• Model / Unit: ZE375GK
• Manufacture date: March 2023
• Operating hours: 3,119 h
• Attachment: Standard digging bucket (please confirm capacity / teeth type)
• Location: Changsha, Hunan, China

Condition summary (expected with 3,119 h):

• Mid-life usage: 3,119 hours is moderate-to-high for a ~3-year machine — still serviceable but several wear items should be checked closely.
• Engine & emissions: Verify start-up behavior, smoke, oil consumption and presence/function of aftertreatment (DPF/SCR) if fitted.
• Hydraulics: At this hour range check pump condition, valves, oil cleanliness, cylinder seals and any seepage at fittings.
• Undercarriage & driveline: Expect measurable wear on track shoes, sprockets, rollers, and pin/bushings — these are likely the main replacement items.
• Structure & attachments: Inspect boom/arm pin bores and bucket cutting edge/teeth for wear or weld repairs.
• Electrical & cab: Verify instruments, warning codes, HVAC and any installed cameras/telemetry.

Recommended pre-purchase inspection checklist:

• Documents: machine serial/VIN, factory certificate, full service and repair records, any warranty documents.
• Engine: confirm model/serial; cold start & idle observation; oil level/condition; consider oil analysis and air intake/exhaust inspection.
• Hydraulics: hydraulic oil sample and cleanliness check; pressure/flow test; inspect hoses, pump, valve block, cylinder rods for pitting/leaks.
• Undercarriage: measure track shoe thickness, sprocket tooth profile, roller/idler wear, and pin/bushing internal diameter or % wear remaining.
• Boom/arm/pins: check for axial/play at pins, visible cracks, weld repairs and cylinder rod condition.
• Bucket: cutting edge thickness, teeth condition, welds and quick coupler function (if fitted).
• Final drives & travel motors: check for leaks, unusual noise and temperature during operation.
• Electrical/controls: scan for fault codes, test gauges, joysticks, lights and HVAC.
• Test run: provide/perform a working test including cold start, idle, full-load digging cycles, travel and swing under load; note any abnormal noises, smoke, vibration or overheating.

Suggested documents & media for listing:

• Scans/photos of serial/VIN plate and factory certificate
• Recent service/maintenance invoices and replacement parts records
• Engine model and rated power, hydraulic flow/pressure specs (if available)
• Undercarriage wear measurements or percent remaining (mm or %)
• High-resolution photos: full machine (multiple angles), cab interior, engine bay, undercarriage close-ups, boom/arm pin bores, bucket details and any weld repairs
• Short video: cold start, idle, digging cycle (empty & loaded), travel and swing

Next steps / offer:

• If you provide the machine serial/VIN plus recent photos/videos and service records, I can help assess condition, estimate market value and list likely repair/maintenance needs.
• I can also help arrange a remote inspection checklist or obtain transport/auction/export quotes if needed.