ZE485E‑10‑5075 — Oct 2020 | 3,610 hrs | Parked in Weinan | No bucket assembly

Summary

• Model/ID: ZE485E‑10‑5075
• Manufacture: October 2020
• Hours: 3,610 (moderate)
• Location/status: Parked in Weinan
• Attachment: bucket assembly missing

Key risks / observations

• Missing bucket may indicate prior removal for repair/sale or possible vandalism/theft — verify reason.
• Without the bucket you cannot fully load-test hydraulic circuits, quick coupler, or check linkage loads on pins/bores.
• Moderate hours → expect wear on engine, hydraulics, swing, and undercarriage components.
• Parked condition risks: battery/discharge, seals hardening, surface corrosion, contamination in fuel/hydraulic tanks.

Priority pre-purchase checks

1. Documentation: verify VIN/engine numbers, full service and ownership history; ask why bucket is missing and whether mounting hardware is present.
2. Visual inspection: engine bay, hydraulic tank interior, undercarriage, boom/arm mounting points, quick‑coupler/bracket, pins, bushings and welds.
3. Hydraulic system: check for disconnected hoses, capped lines, leaks, cylinder rod condition; perform pressure/flow test (may need a temporary load or test coupler).
4. Boom/arm/pins: measure pin/bushing wear and check for play, cracks, or weld repairs at mounting points.
5. Oil sampling: engine, hydraulic and final drives for wear metals/water/contamination.
6. Undercarriage: track chain, shoes, sprockets, rollers and idlers — measure remaining life%.
7. Swing and final drives: check for play, noise, seal condition.
8. Electrical & controls: fault codes, joystick response, instrumentation, HVAC.
9. Check for missing mounting hardware: pins, retaining clips, hydraulic quick coupler parts, hoses/adapters.
10. Ask seller for photos showing where bucket normally mounts and any removed components stored with the machine.

Additional considerations

• Cost to source and fit a compatible bucket (or other attachment) — availability, size/class match, coupler compatibility and hydraulic fittings.
• If bucket removed for repair, get documentation/receipts for the repair and confirm condition of returned bucket (if included).
• Missing bucket can reduce bargaining power but may also signal hidden issues — inspect thoroughly.

Recommended next steps

• Request high‑resolution photos and a short video: engine start, idle, boom/arm movement, quick‑coupler area, undercarriage, and closeups of pins/bushings.
• Arrange a site inspection that includes hydraulic pressure/flow tests and oil sampling; if possible bring or borrow a test bucket/weight to load the linkage.
• Get quotes for replacement or compatible bucket(s) and estimated installation costs.
• Consider hiring a third‑party inspector if you’re not inspecting in person.