ZE375GK‑1128 | Mar 2024 | 578 h | Parked (no power) in Huizhou — Standard Digging Bucket

Basic information

• Brand: Zoomlion
• Model / Unit No.: ZE375GK‑1128
• Manufacture date: March 2024
• Operating hours: 578 h
• Attachment: Standard digging bucket (please confirm capacity, width and tooth type)
• Location: Huizhou, Guangdong, China — currently parked with no power (please confirm if battery disconnected or main electrical fault)

Condition summary

• Hours: 578 h is low—machine should be largely near-new with limited wear but verify recent usage pattern and maintenance.
• Engine: Likely good condition but check for startup issues after being without power; verify oil level/condition, coolant and any aftertreatment system (DPF/SCR) status.
• Electrical: “No power” raises possibility of a discharged/removed battery, electrical isolation for storage, or an electrical fault—test battery, starter, alternator, fuse/relay box and wiring harness.
• Hydraulics: Expect minimal wear, but inspect for seepage, hose condition and performance under load.
• Undercarriage & driveline: Low hours generally mean little wear; still check track shoes, rollers, idlers, sprockets and track tension.
• Structure & bucket: Inspect boom/arm pin wear, cutting edge and teeth, and check for transport damage or weld repairs.
• Warranty/documents: Likely still within factory warranty depending on registration—confirm with serial/VIN and paperwork.

Recommended pre‑purchase inspection checklist

• Documents: serial/VIN, factory certificate, warranty papers, and service/maintenance records.
• Electrical/battery: check battery state, terminals, charging system, key/master switch and cabin electricals; scan for stored fault codes.
• Engine: cold start and warm-up; check for smoke, oil consumption, leaks, oil & coolant condition; review DPF regeneration history if fitted.
• Hydraulics: pressure/flow check, hydraulic oil condition, inspect pumps, valve block, hoses and cylinder seals.
• Undercarriage: measure shoe thickness, sprocket teeth, roller/idler condition and % life remaining.
• Boom/arm/pins: check pin/bushing play, visual cracks, weld repairs and cylinder rod condition.
• Bucket: cutting edge/teeth wear, welds and quick coupler if fitted.
• Final drives & travel motors: inspect for leaks and abnormal noise/temperature under test.
• Cab & electronics: test gauges, joysticks, HVAC, lights, cameras and alarms.
• Test run/video: cold start (after connecting/charging battery), idle, digging cycles (empty & loaded), travel and swing under load; highlight any abnormal noises, smoke or overheating.

Suggested listing documents & media

• Scans/photos of serial/VIN plate and factory certificate
• Warranty documents and any service/maintenance records
• Engine model and rated power; hydraulic specs if available
• Bucket specification (capacity, width, tooth type)
• High-resolution photos: multiple exterior angles, cab interior, engine bay, undercarriage, boom/arm pivot close-ups, bucket details
• Short working video (cold start after power restored and operational cycles)

Next steps / call to action

• Please confirm what “no power” specifically means (battery removed/dead, key isolated, or other) and provide serial/VIN plus recent photos and service records.
• I can help verify warranty status, estimate market value, prepare a listing description in English, or generate a pre-shipment inspection checklist. Which would you like next?